ढाँचा:Cvt/doc

This template {{cvt}} is similar to {{convert}}, with one change: {{cvt}} has option |abbr=on preset.

Usage

This template shows measurement quantities as primary and converted secondary units (or ranges), with optional rounding, wikilinks, abbreviation, or US spellings, and various separators including:  parentheses "( )", slash, "or", hyphens, comma, "to" or dashes. Styles include: distance "32 metres (105 ft)" and "32 metres or 105 feet"; temperature "18 °C (64 °F)" or "18 °C (64 °F)"; weight "55.0 kg (121.3 lb)" or "65 to 80 kg (143 to 176 lb)"; etc. For units see: Convert/list of units.

Options include:

lk=in, abbr=on, abbr=none, sp=us, adj=on, adj=mid, disp=x, disp=table and sortable=on (explained below). By default, output is rounded to match the precision of input; alternatives include: sigfig=3 or using the end parameter, such as "|1" to show tenths or "|-2" to show full 100's, etc.

Single value:

{{convert|original_value|original_unit|conversion_unit|round_to|...}}

Range of values (see below for list of range options):

{{convert|orig_val1|range|orig_val2|original_unit|conversion_unit|round_to|...}}

• Numbers must be entered in unformatted form (without commas). For negative numbers (i.e. temperatures or precision) use a hyphen as the minus sign for the input number. Values output by the template will be displayed formatted and with a true minus sign where appropriate. To specify with commas, re-code a number as {{formatnum:9,000,500|R}} (becomes 9000500).
• Optional parameters, in examples below, allow abbreviated units (abbr=on), or US spellings (sp=us for meter), or slash separation (disp=s), or hyphenation (adj=on), etc.
• For this template many levels of substitution are possible, hence doing this fully, step by step, is cumbersome. Use Special:ExpandTemplates instead.
• The template has no in-built capacity for dimensional analysis. It is therefore up to the user to ensure that the input and output units are compatible. Do not, for example, attempt to convert barrels to tonnes (but see {{bbl to t}}). Also beware of units with similar names; the code oz, for example, is for the avoirdupois ounce (a unit of mass), do not use this if you want fluid ounces.
• An attempt to convert a unit to itself (e.g. km to km), will result in a template loop.
• The range functionality is not fully implemented for all units, so experimentation may be required.
• This documentation page tends to lag behind in terms of what the template can do. For details see the talk page and its archives.

Examples

Single value

Input	Displays as
{{convert|3.21|kg|lb}}	3.21 kilograms (7.1 lb)
{{convert|3.21|kg|lb|0}}	3.21 kilograms (7 lb)
{{convert|10|kg |lb |disp=or}}	10 kilograms or 22 pounds
{{convert|6|ft|5|in|m}}	6 feet 5 inches (1.96 m)
{{convert|10|mi}}	10 miles (16 km)
{{convert|100|mpgus}}	100 miles per US gallon (2.4 L/100 km; 120 mpg‑imp)
{{convert|120|km/h}}	120 kilometres per hour (75 mph)
{{convert|18|°C|°F}}	18 °C (64 °F)
{{convert|1250|sqft|m2|lk=in|sigfig=2}}	1,250 square feet (120 m2) Note 'lk=in' links only the input unit. This example is for illustration only, common units of measurement should not be linked. See: wp:overlink.
{{convert|20.5|m3|cuyd|lk=out|abbr=on}}	20.5 m3 (26.8 cu yd) Note 'lk=out' links only the output unit, cu yd.
{{convert|641|acre|km2 sqmi|lk=on}}	641 acres (2.59 km2; 1.002 sq mi) Note 'lk=on' links all units. Per guidelines, common units should not be linked. See: wp:overlink.
{{convert|641|acre|km2 sqmi|2|lk=on}}	641 acres (2.59 km2; 1.00 sq mi) Although 640 acres equals 1 square mile; 641 acres rounded to two decimal places equals 1.00 sq mi.

Range of values

Note: not yet operational for all units

Input	Displays as
{{convert|60|and|170|kg|lb}}	60 and 170 kilograms (130 and 370 lb)
{{convert|60|to|170|kg|lb}}	60 to 170 kilograms (130 to 370 lb)
{{convert|60|to(-)|170|kg|lb}}	60 to 170 kilograms (130–370 lb)
{{convert|60|-|170|kg|lb}}	60–170 kilograms (130–370 lb)
{{convert|41|to|50|F|C}}	41 to 50 °F (5 to 10 °C)
{{convert|41|-|50 |F|K}}	41–50 °F (278–283 K)
{{convert|60|x|120|m|ft}}	60 by 120 metres (200 ft × 390 ft)
{{convert|60|+/-|10|m|ft}}	60 ± 10 metres (197 ± 33 ft)
{{convert|19|to|27|L|USgal}}	19 to 27 litres (5.0 to 7.1 US gal)
{{convert|5|to|7|L|USgal|abbr=mos}}	5 to 7 litres (1.3 to 1.8 US gal)
{{convert|4|-|9|L|USgal|abbr=none}}	4–9 litres (1.1–2.4 US gallons)
{{convert|30|-|40|mpg}}	30–40 mpg
{{convert|7|-|9|L100km}}	7–9 L100km

The following conversions are currently not available as a range of values:

• Some imperial and US gallon-based units
• Other fuel-consumption units, except "mpg" or "L100km" shown above.
• Large scale units (e3, e6, e9)
• Combination-based units (ft&in, st&lb, lb&oz) due to complexity of the conversion.

Parameters

Parameters
Use US spelling	attach |sp=us
Make units wikilinked	attach |lk=on   to link all units                               (default: lk=off) attach |lk=in   to link only the input units attach |lk=out  to link only the output units (The manual of style suggests that you should not link common units of measurement).
Use the adjective form, or insert mid-text words	attach |adj=on (e.g. "The 190-foot (58 m) bridge" as opposed to "The 190 feet..."). This produces the adjective form—the unit name in the singular with a hyphen (according to the Manual of Style). attach |adj=mid (e.g. "The 190-foot bridge (58 m)" as: |adj=mid|bridge, or "The 190-foot-long bridge (58 m)" as: |adj=mid|-long bridge)          Any rounding-parameter should follow the mid-text: "text|0".
Abbreviate units, or not	attach |abbr=on       to show unit symbols          (default: abbr=off) attach |abbr=none   to show all unit names in full words attach |abbr=in       to abbreviate input units attach |abbr=out     to abbreviate output units attach |abbr=values    to suppress unit names & show only values. So, {{convert|6|mi|abbr=values}} gives: 6 (9.7).
Change "( )" to display other separators	attach |disp=comma    to put comma, not brackets/parentheses attach |disp=or          to put "or" between units attach |disp=s (or |disp=/) for slash (e.g. 190 foot/58 metre). The default value is:  disp=b for brackets/parentheses.
Change "( )" to customized separators	attach |disp=x| (begin | end)     to show "xx (begin yy end)" attach |disp=x|;                               to show "xx; yy" attach |disp=x| (same as |)         to show "xx (same as yy)".
Display output only	attach |disp=output only                   to show result number & unit attach |disp=output number only     to show just number Note when using "disp=output only" then the unit name can still be shown as full words by abbr=none, or linked by lk=on.
Display units inverted as reverse order	attach |disp=flip        to reverse the order & show output unit first So, {{convert|6|km|disp=flip}} shows "3.2 mi (6 kilometres)". To get symbol "km" use abbr=in, to abbreviate the input unit.
Display unit name (only)	attach |disp=unit         to show the unit name for a symbol The unit name will be plural when the amount is not 1, or hyphenated when adj=on. So, {{convert|2|cuyd|disp=unit}} shows "cubic yards" plural.
Display amounts as table cells	attach |disp=table (or |disp=tablecen) Note: For use in tables, the template must start on a new line after a pipe. Only the number will be displayed unless you set |abbr=on, |lk=on, |lk=in or |lk=out. Example: here
Round to a specified number of significant figures	attach |sigfig={some non-negative integer}. In the case of temperatures Celsius or Fahrenheit this refers to the difference with the absolute-zero temperature. For example, at room temperature two significant digits means rounded to tens of degrees.
Round by 5	attach |disp=5  to round the output amount to the nearest 5 units. Not supported for all options.
Let Convert decide the unit to convert to	skip the precision parameter (the 3rd or 4th unnamed parameter) e.g. {{convert|100|km|kn}} gives 100 kilometres () and {{convert|100|km}} gives 100 kilometres (62 mi).
Display input value with a fraction	{{convert|3/8|in|mm|3|abbr=on}}→ 3⁄8 in (9.525 mm) or {{convert|11+1/4|in|cm|2|abbr=on}}→11 1⁄4 in (28.58 cm) For negative amounts, use 2 minus signs: -11-1/4.
Generate a hidden sort key for use with a sortable table	attach |sortable=on to generate a hidden sort key (in the form of <span style="display:none">00000005</span>) so that sortable tables will sort correctly. This takes the first numeric value and left pads it with zeros to 16 places. It ignores any additional values, ie, if you use 6|ft|2|in as the value, it will only use the 6 for the sort key. This will cause numeric values to sort in numeric order, ie: 5, 10, 15 instead of 10, 15, 5.

Parameters still under construction

Parameters still under construction. May not work in all situations
Round by 5	attach |disp=5  to round output to nearest 5 units. Might not work when linking unit names.
disp=tablecen	Similar to disp=table except that the values with be centered within the column. See the tables at La Nouvelle branch, BM-21 Grad for in use examples.
disp=comma	Similar to disp=s except the two values will be separated by a comma, for situations where the first value is already within parentheses. See the Geography tables on Labrador for an example.
abbr=in	Abbreviates only the input unit.
abbr=out	Abbreviates only the output unit.
abbr=comma	Abbreviates (removes) commas. This is a limited, temporary option, until comma=off can be implemented. For ranges, using abbr=comma conflicts with internal options, so instead, append "nocomma" to a range-word: tonocomma, bynocomma, andnocomma, -nocomma & xnocomma.
abbr=mos	For ranges, abbreviates with the input unit repeated, twice. Not to be confused with the specifications at .

Rounding

Convert supports four types of rounding:

Rounding to a given precision

Specify the desired precision with the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest power of ​¹⁄₁₀ this number. For instance, if the result is 8621 and the round number is '-2', the result will be 8600. If the result is '234.0283043' and the round number is '0', the result will be 234.

Rounding to a given number of significant figures

Specify the desired number of significant figures using |sigfig={some non-negative integer} as noted above.

Combine both of the above

If both the desired precision and the desired number of significant figures are specified, the conversion will be rounded to the least precise of these.

Default rounding

If neither the desired precision nor the desired number of significant figures are specified, the conversion will be rounded either to a comparable precision as the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant figures, whichever is the most precise. An exception to this is temperature wherein the conversion will be rounded either to precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is the most precise.

Units supported

The table below lists units supported by this template. It is divided up according to the quantity being measured. Not all supported units are listed here; there are links to complete lists for each quantity.

The codes listed in the code column (column 3) are accepted as input by the template. These can be used as the second or third unnamed parameter. For some units there exist alternative codes. These are listed in brackets and have been incorporated to make the code more flexible for editors, e.g. °F or F may be entered.

The codes listed in the combinations column (column 7) can be used to produce multiple conversions. They can only be used as the third unnamed parameter, e.g. {{convert|55|nmi|km mi}} produces "55 nautical miles (102 km; 63 mi)".

Abridged list of units supported by {{Convert}}
Explanation
system	unit	unit- code	symbol or abbrev.	notes	conversion factor	combination output units
the system(s) to which the unit belongs	units listed by name	unit-code to use in template	symbols shown in output	other notes about the units	conversion factors used to convert to and from the SI base unit	output codes for multiple conversions
LENGTH (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion factor/m	combination output units
SI	megametre	Mm	Mm	US spelling: megameter	१,०००,०००
	kilometre	km	किमी	US spelling: kilometer	१,०००	km mi
	मीटर	m	मी	US spelling: meter	१	m ft m ftin
	centimetre	cm	सेन्टीमिटर	US spelling: centimeter	०.०१	cm in
	millimetre	mm	मीमी	US spelling: millimeter	०.००१	mm in
	micrometre	μm (um)	µm	US spelling: micrometer	०.०००००१
	nanometre	nm	nm	US spelling: nanometer	०.००००००००१
non-SI metric	ångström	Å (angstrom)	Å		०.०००००००००१
Imperial & US customary	mile	mi	मी		१,६०९.३४४	mi km
	furlong	furlong			२०१.१६८
	chain	chain			२०.११६८
	rod	rd	rd	For other names of this unit see the full list.	५.०२९२
	fathom	fathom		assumes 1 fathom ≡ 6 ft	१.८२८८
	yard	yd	yd	assumes the international definition	०.९१४४
	foot	ft (foot)	फिट	Code "foot" will show "foot" if plural.	०.३०४८	ft m (foot m) hand  ( ERROR {Convert}: Invalid parameters: 1=floor(hand)+(hand*10)mod10/4 2=( floor(hand)+(hand*10)mod10/4 )*0.1016 3=0 4= 5= 6= with {u}= n= .              Try using range: {{convert|floor(hand)+(hand*10)mod10/4 |( floor(hand)+(hand*10)mod10/4 )*0.1016|0...}} to convert a range of numbers.)
	inch	in	इन्च		०.०२५४	in cm in mm
	Other	nautical mile	nmi	nmi	the international standard nautical mile For other nautical miles see the full list.	१,८५२
parsec		pc	pc		३.०८५६७७५८१४६७२000×10^16
light-year		ly	ly		९.४६०७३०४७२५८०८×10^15
astronomical unit		AU	AU		१४९,५९७,८७०,७००
AREA (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion factor/m2	combinations
SI	square kilometre	km2	किमी२	US spelling: square kilometer	१,०००,०००	km2 sqmi
	square metre	m2	m2	US spelling: square meter	१	m2 sqft
	square centimetre	cm2	cm2	US spelling: square centimeter	०.०००१	cm2 sqin
	square millimetre	mm2	mm²	US spelling: square millimeter	०.०००००१	mm2 sqin
non-SI metric	hectare	ha	हेक्टर		१०,०००
Imperial & US customary	square mile	sqmi	वर्ग मी		२,५८९,९८८.११०३३६	sqmi km2
	एकर	acre			४,०४६.८५६४२२
	square yard	sqyd	sq yd		०.८३६१२७३६
	square foot	sqft (sqfoot)	sq ft	Code "sqfoot" will show "square foot" if plural.	०.०९२९०३०४	sqft m2 (sqfoot m2)
	square inch	sqin	sq in		०.०००६४५१६	sqin cm2
Other	square nautical mile	sqnmi	sq nmi		३,४२९,९०४
	dunam	dunam		For alternative spellings and definitions see the full list	१,०००
	tsubo	tsubo			(४००/१२१)
VOLUME (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion factor/m3	combinations
SI	cubic metre	m3	m3	US spelling: cubic meter one kilolitre	१
	cubic centimetre	cm3	cm3	US spelling: cubic centimeter one millilitre	०.०००००१
		cc	cc
	cubic millimetre	mm3	mm³	US spelling: cubic millimeter	०.००००००००१
non-SI metric	kilolitre	kl	kl	US spelling: kiloliter one cubic metre	१
		kL	kL
	litre	l	l	US spelling: liter one cubic decimetre Allows triple output units. See: full list.	०.००१	l impgal l USgal l U.S.gal l USdrygal l U.S.drygal
		L	L			L impgal L USgal L U.S.gal L USdrygal L U.S.drygal
	centilitre	cl	cl	US spelling: centiliter	०.००००१
		cL	cL
	millilitre	ml	ml	US spelling: milliliter one cubic centimetre	०.०००००१	ml impoz ml USoz ml U.S.oz
		mL	mL			mL impoz mL USoz mL U.S.oz
Imperial & US customary	cubic yard	cuyd	cu yd		०.७६४५५४८५७९८४
	cubic foot	cuft (cufoot)	cu ft	Code "cufoot" will show "cubic foot" if plural.	०.०२८३१६८४६५९२
	cubic inch	cuin	cu in		०.००००१६३८७०६४
Imperial	barrel	impbbl	imp bbl	36 imp gal	०.१६३६५९२४
	bushel	impbsh	imp bsh	8 imp gal	०.०३६३६८७२
		impbu	imp bu
	gallon	impgal	imp gal	4.54609 litres by definition, also 4 imp qt or 8 imp pt or 160 imp fl oz Allows triple output units. See: full list.	०.००४५४६०९	impgal l impgal L impgal USgal impgal U.S.gal impgal USdrygal impgal U.S.drygal
	quart	impqt	imp qt	1/4 imp gal or 40 imp fl oz	०.००११३६५२२५
	pint	imppt	imp pt	1/8 imp gal or 20 imp fl oz	०.०००५६८२६१२५
	fluid ounce	impoz(impfloz)	imp fl oz	1/160 imp gal	०.००००२८४१३०६२५	impoz USoz impoz U.S.oz impoz ml impoz mL
US customary liquid measure	barrel	USbbl	US bbl	31½ US gal used for liquids except for oil and beer (see the full list)	०.११९२४०४७११९६
		U.S.bbl	bbl
	barrel	oilbbl	bbl	42 US gal	०.१५८९८७२९४९२८
	beer barrel	USbeerbbl (usbeerbbl)	US bbl		०.११७३४७७६५३०४
		U.S.beerbbl (usbeerbbl)	U.S. bbl
	gallon	USgal	US gal	231 cubic inches by definition, also 4 US qt or 8 US pt or 128 US fl oz Allows triple output units. See: full list.	०.००३७८५४११७८४	USgal l USgal L USgal impgal
		U.S.gal	U.S. gal			USgal l USgal L USgal impgal
	quart	USqt	US qt	1/4 US gal or 32 US fl oz	०.०००९४६३५२९४६
		U.S.qt	U.S. qt
	pint	USpt	US pt	1/8 US gal or 16 US fl oz	०.०००४७३१७६४७३
		U.S.pt	U.S. pt
	fluid ounce	USoz (USfloz)	US fl oz	1/128 US gal	०.००००२९५७३५२९५६२५	USoz ml USoz mL USoz impoz
		U.S.oz (U.S.floz)	U.S. fl oz			U.S.oz ml U.S.oz mL U.S.oz impoz
US customary dry measure	barrel	USdrybbl	US bbl	105/32 US bsh	०.११५६२८१९८९८५०८
		U.S.drybbl	U.S. bbl
	bushel	USbsh	US bsh	2150.42 cubic inches by definition	०.०३५२३९०७०१६६८८
		USbu	U.S. bu
		U.S.bsh	U.S. bsh
		U.S.bu	U.S. bu
	dry gallon	USdrygal	US dry gal	1/8 US bsh Allows triple output units. See: full list.	०.००४४०४८८३७७०८६	USdrygal l USdrygal L USdrygal impgal
		U.S.drygal	U.S. dry gal			U.S.drygal l U.S.drygal L U.S.drygal impgal
	dry quart	USdryqt	US dry qt	1/32 US bsh	०.००११०१२२०९४२७१५
		U.S.dryqt	U.S. dry qt
	dry pint	USdrypt	US dry pt	1/32 US bsh	०.०००५५०६१०४७१३५७५
		U.S.drypt	U.S. dry pt
SPEED (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion factor/(m/s)	combinations
SI	metre per second	m/s	m/s	US spelling: meter per second	१	m/s ft/s (m/s foot/s)
non-SI metric	kilometre per hour	km/h	किमी/घण्टा	US spelling: kilometer per hour	(५/१८)	km/h mph
Imperial & US customary	mile per hour	mph	mph		०.४४७०४	mph km/h mph kn
	foot per second	ft/s (foot/s)	ft/s	Code "foot/s" will show "foot per second" if plural.	०.३०४८	ft/s m/s
Maritime units	knot	kn (knot)	kn		(४.६३/९)	kn mph
FORCE (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion factor/N	combination output units
SI	giganewton	GN	GN	Allows triple output units. See: full list.	१,०००,०००,०००	GN LT-f GN LTf GN ST-f GN STf
	meganewton	MN	MN	Allows triple output units. See: full list.	१,०००,०००	MN LT-f MN LTf MN ST-f MN STf
	kilonewton	kN	kN	Allows triple output units. See: full list.	१,०००	kN LT-f kN LTf kN ST-f kN STf
	newton	N	N		१	N lb-f N lbf N oz-f N ozf
	millinewton	mN	mN		०.००१	mN oz-f mN ozf mN gr-f mN grf
	micronewton	μN (uN)	µN		०.०००००१	μN gr-f μN grf
	nanonewton	nN	nN		०.००००००००१	nN gr-f nN grf
cgs	megadyne	Mdyn	Mdyn		१०
	kilodyne	kdyn	kdyn		०.०१
	dyne	dyn (dyne)	dyn		०.००००१
	millidyne	mdyn	mdyn		०.०००००००१
Metric gravitational units	tonne-force	t-f	tf		९,८०६.६५
		tf	tf
	kilogram-force	kg-f	kgf		९.८०६६५
		kgf	kgf
	gram-force	g-f	gf		०.००९८०६६५
		gf	gf
	milligram-force	mg-f	mgf		०.०००००९८०६६५
		mgf	mgf
Avoirdupois-based units	poundal	pdl	pdl		०.१३८२५४९५४३७६
	long ton-force	LT-f	LTf		९,९६४.०१६४१८१८३५२	LT-f ST-f
		LTf	LTf			LTf STf
	short ton-force	ST-f	STf		८,८९६.४४३२३०५२१	ST-f LT-f
		STf	STf			STf LTf
	pound-force	lb-f	lbf		४.४४८२२१६१५२६०५
		lbf	lbf
	grain-force	gr-f	grf		०.०००६३५४६०२३०७५१५
		grf	grf
ENERGY (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion factor/J	combinations
SI	gigajoule	GJ	GJ		१,०००,०००,०००
	megajoule	MJ	MJ		१,०००,०००
	kilojoule	kJ	किजु		१,०००
	hectojoule	hJ	hJ		१००
	decajoule	daJ	daJ		१०
	joule	J	J		१
	decijoule	dJ	dJ		०.१
	centijoule	cJ	cJ		०.०१
	millijoule	mJ	mJ		०.००१
	microjoule	μJ (uJ)	µJ		०.०००००१
	nanojoule	nJ	nJ		०.००००००००१
cgs	megaerg	Merg	Merg		०.१
	kiloerg	kerg	kerg		०.०००१
	erg	erg	erg		०.००००००१
Watt-hour multiples	terawatt-hour	TWh	TWh		३.६×10^15
		TW.h	TW·h
	gigawatt-hour	GWh	GWh		३.६×10^12
		GW.h	GW·h
	megawatt-hour	MWh	MWh		३,६००,०००,०००
		MW.h	MW·h
	kilowatt-hour	kWh	kWh		३,६००,०००
		kW.h	kW·h
	watt-hour	Wh	Wh		३,६००
		W.h	डब्ल्यु.एच
Electron- volt multiples
	gigaelectronvolt	GeV	GeV		०.०००००००००१६०२१७६४८७
	megaelectronvolt	MeV	MeV		१.६०२१७६४८७×10^−13
	kiloelectronvolt	keV	keV		१.६०२१७६४८७×10^−16
	electronvolt	eV	eV		१.६०२१७६४८७×10^−19
	millielectronvolt	meV	meV		१.६०२१७६४८७×10^−22
Calorie multiples	calorie	Cal	Cal	The thermo-chemical calorie is the default definition. For others, see the full list.	४,१८४
	megacalorie	Mcal	Mcal		४,१८४,०००
	kilocalorie	kcal	kcal		४,१८४
	calorie	cal	cal		४.१८४
	millicalorie	mcal	mcal		०.००४१८४
pound/ ounce-foot/ inch-hour-minute-second	foot-poundal	ftpdl	ft·pdl		०.०४२१४०११००९३८०४८
	foot-pound (energy)	ftlbf	ft·lbf		१.३५५८१७९४८३३१४००३
		ftlb-f	ft·lbf
	inch-pound force	inlbf	in·lbf		०.११२९८४८२९०२७६१६७
		inlb-f	in·lbf
	inch-ounce force	inozf	in·ozf		०.००७०६१५५१८१४२२६०४३५०
		inoz-f	in·ozf
	horsepower-hour	hph	hp·h		2,684,519.537696172792
British thermal unit	British thermal unit	Btu	Btu	The International Steam Table British thermal unit is used. For others, see the full list.	१,०५५.०५५८५२६२
		BTU	BTU
TNT-based units	gigatonne of TNT	GtTNT			४.१८४×10^18
	gigaton of TNT	GtonTNT
	megatonne of TNT	MtTNT			४.१८४×10^15
	megaton of TNT	MtonTNT	Mt
	kilotonne of TNT	ktTNT			४.१८४×10^12
	kiloton of TNT	ktonTNT	kt
	tonne of TNT	tTNT			४,१८४,०००,०००
	ton of TNT	tonTNT
Other
	Hartree	Eh	Eh		४.३५९७४४१७×10^−18
	rydberg	Ry	Ry		२.१७९८७४१×10^−18
	tonne of oil equivalent	toe	toe		४१,८६८,०००,०००
	barrel of oil equivalent	BOE	BOE		६,११७,८६३,२००
	cubic foot of natural gas	cuftnaturalgas (cufootnaturalgas)		Unit-code cufootnaturalgas will show "cubic foot of natural gas" if plural.	1,055,055.85262
	litre-atmosphere	latm	l·atm		१०१.३२५
		Latm	L·atm
	gallon-atmosphere	impgalatm	imp gal·atm		४६०.६३२५६९२५
	gallon-atmosphere	USgalatm (usgalatm)	US gal·atm		३८३.५५६८४९०१३८
		U.S.galatm (usgalatm)	U.S. gal·atm
TEMPERATURE (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion to kelvin	combinations
SI	kelvin	K	K	Allows triple output units. See: full list.	[K]	K °C (K C) K °R (K R) K °F (K F)
	degree सेल्सियस	°C (C)	°से		([°C]+273.15)	°C K (C K) °C °R (C R) °C °F (C F)
Imperial & US customary	degree Rankine	°R (R)	°R		([°R]/1.8)	°R K (R K) °R °C (R C) °R °F (R F)
	degree फेहरनहाइट	°F (F)	°फे		(([°F]+459.67)/1.8)	°F K (F K) °F °C (F C) °F °R (F R)
	Celsius change	C-change		Example:  {{convert|5|C-change}}
	Fahrenheit change	F-change		Example:  {{convert|10|F-change}}
MASS (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion factor/kg	combination output units
SI	kilogram	kg	किलोग्राम	Allows triple output units. See: full list.	१	kg lb kg st
	gram	g	ग्राम		०.००१	g oz
	milligram	mg	mg		०.०००००१	mg gr
	microgram	μg (ug)	µg		०.००००००००१
non-SI metric	tonne	t	t	Allows triple output units. See: full list.	१,०००	t LT t ST
	metric ton	MT	t			MT LT MT ST
Avoirdupois	long ton	LT		2,240 lb used mostly in the British Commonwealth. Allows triple output units. See: full list.	१,०१६.०४६९०८८	LT t LT MT LT ST
		long ton
	short ton	ST		2,000 lb used mostly in the US. Allows triple output units. See: full list.	९०७.१८४७४	ST t ST MT ST LT
		short ton
	stone	st	st	14 lb used mostly in the British Commonwealth except Canada. Allows triple output units. See: full list.	६.३५०२९३१८	st kg st lb
	pound	lb	पाउण्ड	Allows triple output units. See: full list.	०.४५३५९२३७	lb kg lb st
	ounce	oz	oz		०.०२८३४९५२३	oz g
	drachm	drachm			०.००१७७१८४५१९५
	drachm	dram
	grain	gr	gr	equivalent to the troy grain	०.००००६४७९८९१
Troy	troy ounce	ozt	ozt		०.०३११०३४७६८
other	carat	carat			०.०००२
TORQUE (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion factor/N·m	combinations
Industrial
SI	newton metre	Nm	N·m	Triple combinations are also possible. See the full list.	1	Nm kg-m Nm ft-lb
Non-SI metric	kilogram-meter	kg-m	kg-m		9.80665	kg-m Nm kg-m ft-lb
Imperial & US customary	foot-pound	ft-lb	ft-lb		1.3558	ft-lb Nm ft-lb kg-m
Scientific
SI	newton metre	N-m	N·m	Triple combinations are also possible. See the full list.	1	N-m kgf-m N-m lbf-ft
Non-SI metric	kilogram-force meter	kgf-m	kgf·m		9.80665	kgf-m N-m kgf-m lbf-ft
Imperial & US customary	pound-foot	lbf-ft	lbf·ft		1.3558	lbf-ft N-m lbf-ft kgf-m
PRESSURE
	unit	unit- code	abbrev- iation		conversion factor/Pa
	gigapascal	GPa	GPa		१,०००,०००,०००	‎
	megapascal	MPa	MPa		१,०००,०००	‎
	kilopascal	kPa	kPa		१,०००	‎
	hectopascal	hPa	hPa		१००	‎
	pascal	Pa	Pa		१	‎
	millipascal	‎mPa‎	mPa		०.००१	‎
	millibar	mbar	mbar		१००	‎
		mb	mb			‎
	decibar	‎dbar	dbar		१०,०००	‎
	bar	bar	bar		१००,०००	‎
	kilobarye	kBa	kBa		१००	‎
	barye	‎Ba	Ba		०.१	‎
	standard atmosphere	atm	atm		१०१,३२५	‎
	torr	Torr	Torr		(२०,२६५/१५२)	‎
	millimetre of mercury	mmHg	mmHg		१३३.३२२३८७४१५	‎
	inch of mercury	inHg	inHg		३,३८६.३८८६४०३४१	‎
	pound per square inch	psi	psi		(444,822,161.52605 / 64,516)
FUEL EFFICIENCY
	unit	unit- code		notes		combinations
	kilometres per litre	km/l (km/L)		Use km/L to get "km/L"		km/l mpgimp km/l mpgus
	litres per 100 kilometres	l/100 km (L/100 km)		Use L/100 km to get "L/100 km"		l/100 km mpgimp l/100 km mpgus
	litres per kilometre	l/km (L/km)		Use L/km to get "L/km"		l/km impgal/mi l/km usgal/mi
	miles per imperial gallon	mpgimp				mpgimp mpgus
	miles per US gallon	mpgus (mpgUS, mpgU.S.)		Use mpgUS to get "US" Use mpgU.S. to get "U.S." mpgus will give "U.S." if spelling is set to US & "US" otherwise		mpgus mpgimp
	imperial gallons per mile	impgal/mi				impgal/mi
	US gallons per mile	usgal/mi (USgal/mi, U.S.gal/mi)		As above with the us vs US vs U.S.		usgal/mi
The mpgUS, mpgU.S., USgal/mi vs U.S.gal/mi, km/L, L/100 km and L/km variants work within combinations also (making 36 combinations in total).
POWER
Watts, kilowatts, milliwatts, etc. are supported. As is horsepower (English & metric). Use standard abbreviations as input code (lower case hp for horsepower, for example)
POPULATION DENSITY
	unit	unit- code		notes		combinations
	inhabitants per square kilometre	PD/sqkm		PD stands for population density, i.e. humans (inhabitants)		PD/sqkm PD/sqmi
	per square kilometre	/sqkm		Used when the word 'inhabitants' would be inappropriate.		/sqkm /sqmi
	inhabitants per hectare	PD/ha				PD/ha PD/acre
	per hectare	/ha				/ha /acre
	inhabitants per square mile	PD/sqmi		PD stands for population density, i.e. humans (inhabitants)		PD/sqmi PD/sqkm
	per square mile	/sqmi		Used when the word 'inhabitants' would be inappropriate.		/sqmi /sqkm
	inhabitants per acre	PD/acre				PD/acre PD/ha
	per acre	/acre				/acre /ha
COST PER UNIT MASS
	unit	unit- code		notes		combinations
	dollars per pound	$/lb		"$" can mean US$, HK$, etc.		(none)
	dollars per kilogram	$/kg				(none)
	dollars per troy ounce	$/ozt		12 troy ounces in 1 troy pound		(none)

Examples

• Monitor quality or look at examples at {{Convert/check}}.

See also

• {{Convinfobox}} for use in infoboxes
• {{Bbl to t}} for converting barrel of oil to tonnes
• {{CwtQtrLb to kg}} for converting long hundred weights, quarters and pounds into kilograms
• {{Decdeg}} for converting degrees, minutes and seconds to decimal degrees
• {{HMS2Deg}} for converting hour angles, given in hours, minutes and seconds, to decimal degrees
• {{Height}} for converting and displaying a person's height
• {{Miles-chains}} for converting miles and chains to kilometres linking "chains"
• {{Pop density}} for converting a population and area to a density
• {{Inflation}} for calculating inflation of Consumer Price Index related prices
• {{Metricate}}
• {{RailGauge}} for converting rail (track) gauges